SMART THERMOSTAT – NEOSTAT SERIES

The neoStat’s Smart Thermostats have been designed to be slim & stylish, with three stunning colours available.

NeoStat’s are just a little bigger than a standard light switch, so you will notice what it does rather than where it is.

The NeoStat’s can be controlled from anywhere thanks to the plug and play neoHub

The Heatmiser NeoStat is 230v powered and is the ideal upgrade route for those with an existing mains powered thermostat.

NeoStat can operate in Timer or Heating Mode and can be used with remote sensors.

HEATMISER NEOHUB SMART HEATING HUB

The neoHub Gen 2 handles all of the network communication between the neoStat, neoAir and neoPlug and is very much the brain of the Neo System. Therefore you will require one if you’re looking to control your heating & hot water system from your SmartPhone.

 

The neoHub Gen 2 connects to your home router by an ethernet cable, so one free port is required. The neoHub Gen 2 is very much plug and play and pairing neoStat’s, neoAir & neoPlug to the neoHub Gen 2 couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In Home and Remote access of your heating, hot water and appliances.

 

To ensure your neoHub Gen 2 is always up to date, your neoHub will automatically download and install updates so you will always benefit from the very latest software enhancements.

 

HOMEKIT SUPPORT

The neoHub Gen 2 offers HomeKit support for all connected Neo Devices

 

CLOUD SERVER CONNECTION

As the Heatmiser neoHub connects via the Heatmiser Cloud Servers, there isn’t any technical setup.

 

MESH NETWORKING

The Heatmiser neoHub handles all of the network traffic, automatically routing data the best way from neoStat to neoStat. Mesh Networking helps to ensure you have great coverage throughout your home. For troublesome signal areas, the neoPlug can be used to boost the signal.

 

REMOTE UPDATES

Our auto updates will ensure your neoHub and connected devices are always running the latest firmware, this means you can benefit from our latest software enhancements.

Heatmiser UH4

The Heatmiser UH4 can be used in conjunction with our mains thermostats.
The UH4 provides central switching of up to 4 zones actuators as well as providing an output for a hot water cylinder, the system boiler and pump.
When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone.

Heatmiser UH8

The Heatmiser UH8 can be used in conjunction with our mains thermostats.
The UH8 provides central switching of up to 8 zones actuators as well as providing an output for a hot water cylinder, the system boiler and pump.
When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone.